WK 2500 for testing phovoltaic modules and solar panels

Photovoltaic elements have to pass several comprehensive tests until they run in production, which is also true for the sector of climate and temperatur tests. Together with the solar industry, we developed our own test chamber series and test chambers for testing PV-elements. We have already launched these chambers successfully on the market.

Test chambers for a place in the sun – Photovoltaic put to endurance tests
The test chambers comply with the standards IEC 61215 and IEC 61646 for design approval and design test concerning the parameters cold, heat, humidity and alternating climate. We offer you different test space dimensions and performances to meet your requirements.

# The following tests can be realised: Damp Heat Test
# Humidity Freeze Test
# Temperature Cycling Test
# Light treatment
# Hot-spot endurance test
# UV-test

WK 2500 for testing phovoltaic modules and solar panels

Testing of solar panels
These chambers are used to test photovoltaic modules and solar panels regarding temperature and humidity influence. The current specifications can be fulfilled with the WEISS model WK-2500.
With a test space volume of 2,500 liters and accessibility of the chamber floor the WK-2500 reaches nearly the same performance data as a chamber of series WT/WK.

Technical data of type WK2500/60/2-S

Exterior dimensions: H 2231 x W 1300 x D 3505 mm
Test room dimensions: H 1862 x W 1100 x D 1325 mm
Temperature range: -60 ... +180°C
Cooling down rate: 2,9°C/min (with 230kg solar panels)
Heating up rate: 2,5°C/min (with 230kg solar panels)
Climate working range: 10 ... 90 % r.h. between +10 ... +90°C
Refrigeration unit Water-cooled
Control system: Controller Board S!MCON/32*-NET with Color-Touch-Panel.