Neurtek

NEURTEK, a great team

we are manufacturers and distributors
of equipment for Quality Control and R&D&I

We carefully select the best solution for each application, always leading brands with the best after sales service.
Our technicians are trained in the USA, Germany, England, Denmark, etc. in order to provide them with knowledge and to make the very mos of the equipment.

NEURTEK is also a Calibration Laboratory accredited by ENAC according to UNE-EN ISO/IEC 17025 (Accreditation No. 117/LC10.084) and a Certified Company according to ISO 9001:2000.

35 years of experiencia

NEURTEK started its activity in 1979 and specialised in providing equipment and technical solutions for quality control and R&R&I, amongst which it is worth highlighting automotive, aerospace, linings, research centres and many more.

Closeness and Global Presence

We believe in a personalised service since we are well aware that each client is different. As such, we have a commercial network distributed throughout the Spanish mainland and also have an international network of representatives in various countries such as Morocco, Turkey, Russia, Poland and Latin America.

Own Technical Service

Trained and specialised to offer personalised and efficient support.

Showroom for Tests and Demonstrations

We have a complete testing laboratory for metallographic tests, with cutter, press and polishing machine, in addition to a hardness tester and microscope with image analysis.
Moreover, we have all the consumables available which may be required for the preparation of the test pieces.
Get in touch with us to perform a preparation demo with your sample.

Temperature contol jacket for viscosity cup

The NEURTEK Temperature Control Jacket for Viscosity Cup is a double jacketed casing of anodised aluminium with built-in spirit level to bring the viscosity beaker to the required temperature with cooled and heated liquids. Ref. 0201320 Thermal jacket for ISO viscosity flow cups Ref. 0201310 Thermal jacket for FORD / DIN viscosity flow cups +

Precision Grindometer

This instrument is used to determine the degree of fineness of grinding of paints. It is also used in the food industry (e.g. chocolate) and pharmaceutical (creams). +

Pfund Thickness Gauge

This instrument consists of two concentric cylinders, one sliding inside the other. A spherical glass lens is fitted to the end of the central cylinder and when pressed into the wet film it leaves a trace. The diameter of this mark varies depending on the thickness of the coating, which can easily be assessed from the conversion table supplied with the instrument. • Ideal for measuring the thickness of translucent products (varnish, oils etc.) • Measurement range of 2.25 - 360µm (0.09 - 14.17mils) +

Wet Film Thickness Gauge WG

Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications. +

Wet Film Thickness Gauge

A wheel-shaped thickness gauge made of stainless steel to check thickness of fresh and wet film +

Cross Cut tester NK2000

The new tester benefits from the ergonomic design of the handle. It features improved surface adaptability for curved surfaces and usability. +

Multifunctional Master Paint Plate

The multifunctional Paint Plate is a very practical instrument for users, inspectors and professionals in the coating field. This pocket sized instrument allows to check the following parameters:Fresh film thickness, Progressive film application, Adherence, Checking the rounding of the edges (insufficient covering), assessment of the viscosity, thickness of glass. +

Pull / Push Adhesion, Electronic Adhesion Tester KN-10

Equipment developed to measure the adhesion of paint films, coatings and building materials on top of any substrate. +

Dollies

Dollies for adherence tests in coatings, galvanic films and building materials. +

Impact tester for paint

Impact test of paint coatings applied to metal base. ISO, DIN, ASTM. +

Hand-Held Enamel Impact Tester

Hand-Held Impact Tester, for impact resistance test of flat or curved vitrified enamel covered surfaces according to WAGNER, in accordance with DIN 51155 and ISO 4532 norms, and of “HPL” high pressure decorative laminated (films of cellulosed fiber impregnated with thermostable resins), this is interior furnishing, according to EN ISO 438-2. +

Stain stell ball for decorative laminates

Stain steel ball, Ø 42,8mm and 324 gr weight, complied with UNE EN 438-2 for decorative laminates, on the impact section. +

Cupping Tester

Manual cupping tester to determine the resistance of coatings of paints, varnishes and related products to cracking or adhesion of the substrate in different deformation conditions, according to UNE-EN ISO 1520. +

Cylindrical Mandrels

This cylindrical mandrel bend tester consists of a robust frame which has a bending lever, with height adjustable rollers and a sliding vice for the sample. Thanks to its design, the instrument can be adapted to the diameter of the mandrel used are bent perfectly and regularly over the mandrels +

Conical Mandrel Bend Tester

conical mandrel tester is used in the determination of elasticity, adhesion and elongation of paint on sheet metal. The specimen can be bent on part of or along the entire length of the mandrel, and the results (cracks) corresponding to different test diameters can be observed in a single operation. +

Aluminium test panels

Test panels reduce the variability of the surface properties of metals to the minimum and offer a reproducible and uniform test surface. +

Steel test panels

Manufactured in low carbon steel. Suitable for cupping test. Dimensions: 140 x 70 x 0,8 mm. and 152 x 76 x 0,8 mm. Comply with the UNE EN ISO 1514 standard. Other dimensions can also ve supplied. +

Persoz & König Pendulum Hardness Tester

Device developed for paints and inks superficial hardness measurement. +

Pencil Hardness Tests

This is a simple and effective technique to evaluate the hardness of many coatings. +

Hardness Test Kit

The Hardness Test is a pocket instrument for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics or related products. +

Sikkens NK3000 Scratch Tool

Cutting tool especially designed for cutting panels or specimens with coatings or test panels for salt fog corrosion tests, as described in the standards ISO 12944-6:2018, ISO 17872, ISO 9227. +

Stainless Steel Pycnometer

This Pycnometer is a stainless steel precision instrument to determine the specific weight of paints and similar products. +

Digital Resistivitimeter RE45

Equipment developed to measure the resistivity of paints, varnishes and liquids in a fast and precise way. Indispensable for the correct functioning of electrostatic paint installations. It helps saving paint and reducing paint waste. +

ATX Automatic Applicator

NEURTEK´s ATX automatic equipment ensures linear motion and application of the film with repetitive and high quality results, thus avoiding variable factors. +

Wire bar coaters

These bars are ideal for the application of inks and coatings onto flexible materials such as paper, card, textiles, leather etc. +

Quadrangular Applicator

Paint spreader of constant coat thickness. Can be supplied in 6 standard versions, each with four groove depths or coat thicknesses. Standard effective width is 60mm, but special widths and micrometric thicknesses will be manufactured to order. +

Baker Universal Applicator

Film applicator with variable height adjustable through and eccentric and graduated drum. Coat thickness adjustable from 0 to 250 microns. +

Baker Applicator

Film applicator of constant coat thickness, with four pre-defined coat application heights. +

Bird film applicator

Bird type film applicator with four standard coat application heights: 50, 100, 150 and 200 microns. +

“Economic” Contrast cards, for paint tests, with UV component

“Economic” Contrast cards, for paint tests, with UV component +

Opacity Chart

Opacity Chart refers to charts on which the test pattern is a simple combination of black and white areas, large enough for wide aperture reflectance instruments, as well as for visual opacity and color observations. Leneta opacity charts comply with all test methods specifying charts of such design. +

Viscosity Flow Cups ISO

Very easy to use instruments made of anodized aluminium, with a stainless steel orifice, for measuring the consistency of paints, varnishes and similar products. The measured kinematic viscosity is generally expressed in seconds (s) flow time, which can be converted to Centistokes (cSt) if the Standard stipulates a conversion method. +