Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

PosiTest AT-M Manual

Pull-off Adhesion Testers. Manual hydraulic pump designed.

 

  • Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
  • Pull Rate Indicator to manually monitor and adjust the rate of pull
  • Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
  • Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
  • 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
    - 10 mm: 10000 psi (70 MPa)
    - 14 mm: 6000 psi (40 MPa)
    - 20 mm: 3000 psi (20 MPa)
    - 50 mm: 500 psi (3.5 MPa)
  • Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cell
  • Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls
  • Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data
  • Conforms to international standards including ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and others
  • Software Updates via web keep your instrument current
Contact us

Standards

ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 y otras.

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about PosiTest AT-M Manual