Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Hand-Held Enamel Impact Tester

Hand-Held Impact Tester, for impact resistance test of flat or curved vitrified enamel covered surfaces according to WAGNER, in accordance with DIN 51155 and ISO 4532 norms, and of “HPL” high pressure decorative laminated (films of cellulosed fiber impregnated with thermostable resins), this is interior furnishing, according to EN ISO 438-2.

Hand-Held Enamel Impact Tester

Hand-Held Impact Tester, for impact resistance test of flat or curved vitrified enamel covered surfaces according to WAGNER, in accordance with DIN 51155 and ISO 4532 norms, and of “HPL” high pressure decorative laminated (films of cellulosed fiber impregnated with thermostable resins), this is interior furnishing, according to EN ISO 438-2.

This test examines the properties of coating by the cracks and flakes that appear with different impact forces, adjustable in the device between 0 and 90 Newtons.

EN-ISO - DIN

Impact ball Diameter: 5 mm
Force in Nm adjustable between 0 and 90

References

Referencia Description Quotation Request
0305200 Hand-Held Impact Tester for Varnished and Laminated accordin to UNE EN 438-2 / DIN 51155 / ISO 4532 Quotation Request
0305202 Base plate for hand-held impact tester relating to DIN 53799 Quotation Request
0305199 Hand-Held Impact tester with base plate DIN 51155 and ISO 4532 Quotation Request
Contact us

Downloads

Standards

DIN 51155, ISO 4532, UNE EN ISO 438-2.

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Hand-Held Enamel Impact Tester