Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Hegman Grindometer

Intended for measuring the thinness of grind of paints, lacquers, varnishes, inks, pastes etc. Indispensable in the manufacture of paints and airless applications, when the appropriate nozzle is to be chosen.

Intended for measuring the thinness of grind of paints, lacquers, varnishes, inks, pastes etc. Indispensable in the manufacture of paints and airless applications, when the appropriate nozzle is to be chosen.

• Consists of a hardened and gauged part, which makes it more economic, lighter and smaller.
• It is delivered with a hardened scraper, in a practical leather case.
• Elimination of the notches for the scale that used to be necessary. The scale is not part of the measuring surface anymore, but rather electrically inscribed in the sides. This makes cleaning simpler, it is sufficient to use a cloth, and the readjustment is easier and cheaper, when the measuring surface is worn.
• It is made of corrosion resistant steel. Greasing or special care is not necessary, so it can also be used in watery agglutinating agents.
• All the executions also have the graduation in Herman-NS scale, which prevents wrong indications of the grain.
• Good value for money, it features two slots, so that by measuring a single sample a double determination can be achieved.
• INTA’s version is excluded. This model only has one measuring slot, but it is equipped with three scales, in NS and in mils.
The NS scale is found in the measuring surface, close to the slot.
• In addition to the graduation according to NSA, the scale FPVPC can also be used. In the chart on the back the connections between the different units are shown.

References

Referencia Description Quotation Request
0236300 Grindometer Hegman 0-15 µm Double Channel grind gauge Quotation Request
0236000 Grindometer Hegman 0-25 µm Double Channel grind gauge Quotation Request
0236100 Grindometer Hegman 0-50 µm Double Channel grind gauge Quotation Request
0236200 Grindometer Hegman 0-100 µm Double Channel grind gauge Quotation Request
Contact us

Downloads

Standards

UNE EN ISO 1524, ASTM D1316.

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Hegman Grindometer