Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Moisture/Solids/Ash Analyzer Computrac MAX 5000XL

The Computrac® MAX®-5000 is the most comprehensive of the MAX®-Series instruments. Aside from moisture analysis in solids and liquids it can also be used as an ash analyzer for up to 600°C, if desired even during the same test! Features include self-cleaning oven and ashing rate control as well as connectivity to the company wide IT infrastructure.

The Computrac MAX 5000XL advances the state of the art in rapid moisture and ash analysis with a new temperature controlled balance that provides users with more stable and accurate measurements. The new instrument also features a temperature ramp control feature that allows the MAX 5000XL to be used for qualitative analyses that were previously only possible using a thermogravimetric analyzer (TGA).

The new MAX 5000XL features the same intuitive user interface and rugged design as its predecessor, the MAX 5000. Improvements to the design and high temperature performance of the balance system of the MAX 5000XL now make it possible to accurately analyze materials with ash concentrations of as little as 0.5%.

Results gained from this test are similar to a scan performed by a more expensive thermogravimetric analyzer. This new feature effectively transforms the MAX 5000XL into a dual use instrument capable of quantitatively testing for moisture and ash and qualitatively testing for the presence of certain organic or inorganic ingredients, and the degradation temperature of the material under test.

  • Measures Moisture or Solids from 0.1% to 99.9% in Minutes
  • Sample Sizes from 200mg to 100gm
  • Temperatures from 25-600°C
  • Temperature Ramping in 1°C Increments for Sample Characterization
  • Linked Test Capability for Multiple Results from a Single Sample
  • Inert Gas Purge Capability
  • Security Access Codes to Protect Programs or Instrument Settings
  • Computer Interface or Company Intranet Access Capable
  • Stores up to 250 User-Programmable Parameter Settings
  • Free Trials and Loaner Service
  • 24-Hour Customer Support
  • Free Method Development over the lifetime of the Instrument

Features

  • Customizable test parameters to optimize results
  • Flexible ending criteria ensure accurate test results
  • Ashing-rate program controls ignition to minimize flashing
  • Real-time graphing of weight loss, rate and end point prediction
  • Foil and syringe weight entry mode for the most volatile samples
  • Nitrogen gas purge minimizes oxidation of samples and flashing of volatiles
  • Weight control aids operators and improves test precision
  • Durable, 31 lb. cast aluminum case is dirt and vibration resistant
  • Statistical function calculates mean, standard deviation and coefficient of variation between tests
  • Alphanumeric programmable prompts for sample ID and lot numbers
  • Self cleaning oven simplifies routine maintenance


Specifications

  • Sample Size 200 mg to 100 g
  • Resolution Moisture 0.0001%; Balance: 0.0001 g
  • Moisture/Solids Range 0.1% to 99.9%
  • Dry Weight Range 0 - 300%
  • Ashing Range Measures ash/L.O.I. down to 0.5%
  • Results Display % Moisture, % Solids, % Dry Weight, % Ash, % Loss on Ignition
  • Ending Criteria Predict (auto or manual), Time, Rate, Time or Rate, Reliability, Temperature then Predict, Temperature then Rate, Temperature then Time or Rate
  • Heating Range 25 - 600°C, programmable in 1°C increments
  • Maintained to ±1°C within the range of 50 - 300°C and ±2°C within the range 301 - 600°C
  • Test Parameter Memory 244 user-programmable test parameter sets
  • Test Result Memory Data from last 1,000 tests, graphs from last 100 tests
  • Program Identification Alphanumeric; programmable prompts for lot or product ID number
  • Statistical Calculation Mean, Standard Deviation, and Relative Standard Deviation
  • Power Requirements 100-130 V~, 50/60 Hz, 8 amps ~ 220 - 240V~, 50/60 Hz, 4 amps
  • Interfaces RS-232 (9-pin standard); Parallel Printer (LPT-PC 25-pin standard); RJ-45 (ethernet)
  • Dimensions 18.5" L x 12.7" W x 9.5" H/470 mm L x 323 mm W x 240 mm H
  • Weight 31 lbs/14 kg
  • Warranty Two years, factory parts and labor (one year international)

Contact us

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Moisture/Solids/Ash Analyzer Computrac MAX 5000XL