Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Tab Mount Surface Thermometer

Two types of tabs are available for these thermometers. Tab 1 is for on-surface mounting and Tab 2 for in-surface mounting. The drawings show both methods of mounting. For in-surface mounting, a hole, -1/8", in diameter by 1/4" deep is machined in the part to be measured. Holes also need to be drilled for mounting screws. The tabs are provided with holes for the screws. Ancillary hands are available for both Tab 1 and Tab 2 Models and are designated by adding an "L" to the model number (eg. 312F T1L would be a 0°F to 250°F thermometer with Tab 1 mounting and an ancillary hand)

Tab Mount Surface Thermometer
Two types of tabs are available for these thermometers. Tab 1 is for on-surface mounting and Tab 2 for in-surface mounting. The drawings show both methods of mounting. For in-surface mounting, a hole, -1/8", in diameter by 1/4" deep is machined in the part to be measured. Holes also need to be drilled for mounting screws. The tabs are provided with holes for the screws. Ancillary hands are available for both Tab 1 and Tab 2 Models and are designated by adding an "L" to the model number (eg. 312F T1L would be a 0°F to 250°F thermometer with Tab 1 mounting and an ancillary hand)

References

Referencia Description Quotation Request
0102100 Magnet Mount Surface Thermometer -20 +120ºC mod. 312C Quotation Request
0102300 Magnet Mount Surface Thermometer +10 +400ºC mod. 314C Quotation Request
0102200 Magnet Mount Surface Thermometer -20 +250ºC mod. 313C Quotation Request
0102000 Magnet Mount Surface Thermometer -15 +65ºC mod. 315C Quotation Request
Contact us

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Tab Mount Surface Thermometer