Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Leneta Scrub Test Panels

Black/White Plastic-Vinyl Chloride/Acetate Copolymer Smooth Matte Surface - Plasticizer Free Used in ASTM D 2486, ASTM D 4213, ISO 11918 and Other Scrub Test Methods

Leneta Scrub Test Panels
Black/White Plastic-Vinyl Chloride/Acetate Copolymer
Smooth Matte Surface - Plasticizer Free
Used in ASTM D 2486, ASTM D 4213, ISO 11918 and Other Scrub Test Methods

In a typical scrub test, the coating is applied to the Leneta Scrub Test Panel at a specified film thickness, allowed to dry, then subjected to scrubbing with a straight-line scrub tester. In ASTM D 2486, a 10 mil shim is inserted under the panel to accelerate failure and thereby reduce testing time. The scrub resistance is the number of scrub cycles required to remove the coating to a specified end point.

Alternatively, the loss in weight is determined after a specified number of scrub cycles as a measure of scrub resistance, with calculation of equivalent loss in film thickness.

References

Referencia Description Quotation Request
0301002 Leneta P-121-10N Plastic Scrub test panels, Black, size 165x432 mm, 10 unit set Quotation Request
Contact us

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Leneta Scrub Test Panels