Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Marking Thickness Gauge MTG

DELTA Marking Thickness Gauge measures the thickness of the paint and thermoplastic of pavement markings (to 12,7 mm). Designed for field work, easy to handle, robust construction and ergonomic design.

The DELTA Marking Thickness Gauge measures the thickness of the paint and thermoplastic of pavement markings. The instrument is a simple, but efficient metric for ensuring correct thickness of pavement stripes. Particularly for thermoplastic stripes, where expensive material constitutes a significant part of the costs, control measures can be necessary.

Measuring the thickness of a pavement stripe is simple and easy. After calibrating the instrument to a reference plane the measurements can be taken. The result is shown on the instrument display, but may also be read out to a data logger unit, Digimatic Printer/ Statistic Processor DP1-VR.

The range of the Thickness Gauge unit is -12.7 mm to +12.7 mm with a resolution of 0.001 mm and accuracy better than +/- 0.01 mm. In addition may come +/-1 count as quantization error. Measurements are shown as absolute values in deviation from the calibrated reference point. Hence a deviation of 0.27 mm above the reference will be shown as “0.270” as will a similar negative deviation.

References

Referencia Description Quotation Request
0806115 Marking Thickness Gauge Quotation Request
Contact us

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Marking Thickness Gauge MTG