Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Bresle Kit - Chloride Test

The Bresle Kit - Chloride Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a patch, distilled water and a conductivity gauge. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Inside the Bresle Kit - Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.

The Bresle Kit - Chloride Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a patch, distilled water and a conductivity gauge. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Inside the Bresle Kit - Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.

Contamination of blast-media
The Bresle Kit - Chloride Test Kit is also suitable to determine the contamination of blast-media in use. This important test described in the ISO 11127-6 and ISO 11127-7 standards helps to prevent that the dissolved salts in the recycled abrasive media or water will not re-contaminate the surface being cleaned.

Bresle KIT- Chloride Test KIT
Supplied with: digital conductivity meter, 25x bresle patch, 6x 25ml beaker, 200ml distilled water, 20ml syringe with needle, calibration and rinse solution, magnetic bresle test spot marker.

References

Referencia Description Quotation Request
DEF-SST1 Quotation Request
DEF-SST3 Quotation Request
0809010 BRESLE KIT - Chloride Test Kit Quotation Request
0809020 Dust Test Kit according to ISO 8502-3 Quotation Request
Contact us

Downloads

Standards

ISO 8502-6, ISO 8502-9

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Bresle Kit - Chloride Test