Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

CoatMaster, measures the coating thickness

The CoatMaster measurement system for coating quality and process control. Measures the thickness, porosity and thermal properties of coated parts in a wide range of applications – in real-time – even parts coated with uncured powder coating or wet paint.

The CoatMaster measures the thickness, porosity and thermal properties of coated parts in a wide range of applications – in real-time – even parts coated with uncured powder coating or wet paint.

For Coating Lines

Powerful, versatile and easy-to-use, the CoatMaster provides a practical solution to improve part quality and coating line efficiency. Aging and wear in the coating line as well as defective parts are identified at the earliest stages of the coating process, saving more time and money.

Non-Destructive, Non-Contact

Our patented and proprietary technology for the non-destructive, non-contact measurement of coating properties uses the most advanced thermal optics (ATO) and digital signal processing (DSP) techniques.


Inspect Parts Remotely

The CoatMaster ATO advanced thermal optics allow you to measure the coating thickness of parts in a non-destructive and non-contact manner – from a distance of 5 - 50 cm away.

As a result, you can inspect a wide range of parts, of different shapes and sizes, in almost any production environment.

Inspect A Precise Spot


Furthermore, you can adjust the size of the inspection area depending on the part geometry, your quality criteria and process requirements.

So you can measure the coating thickness exactly where you want on the part, in a precise spot of 2 - 4 mm².


Application Benefits

The CoatMaster even measures the coating thickness of powder coated parts before the curing stage.

So you can solve quality and process problems early in your process, before such problems become more difficult and costly to solve.

So you can minimize material costs and part rejects, and optimize your process.
Inspect Cured Coatings

Of course, the CoatMaster also measures the coating thickness of powder coated parts after curing.

 

References

Referencia Description Quotation Request
WI-COATMASTER Quotation Request
WI-COAT1000 Quotation Request
WI-COAT500I Quotation Request
WI-COAT1500I CoatMaster Inline 1500 Quotation Request
Contact us

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about CoatMaster, measures the coating thickness