Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Wet Film Thickness Gauge

A wheel-shaped thickness gauge made of stainless steel to check thickness of fresh and wet film

The wet film thickness gauge is a wheel-shaped thickness gauge made of stainless steel to check thickness of fresh and wet film.

The central circle is of smaller diameter and is eccentric of the two outer circles. By rolling the gauge through a wet coating, the centre disc eventually touches the film. This point on the scale indicates the thickness.
If the volume to solids ratio of the coating is known, then the wet film thickness can be used to predict the dry film

References

Referencia Description Quotation Request
0220300 Wet film thickness Wheel 0-25µm Quotation Request
0220000 Wet film thickness Wheel 0-50 µm Quotation Request
0219900 Wet film thickness Wheel 0-125 µm Quotation Request
0220100 Wet film thickness Wheel 0-250 µm Quotation Request
0220200 Wet film thickness Wheel 0-500 µm Quotation Request
0220400 Wet film thickness Wheel 0-1000 µm Quotation Request
Contact us

Standards

UNE 49031-80, ASTM D1212-9, ISO 2808

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Wet Film Thickness Gauge