Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Moisture Analyzer Computrac Vapor Pro Fx

Moisture Analyzer Computrac Vapor Pro Fx

Testing Your Oils Will Never Be the Same!

Chemical Free Operation:
Chemical free means no toxic reagents, and no hazardous material disposal fees.

Results in Minutes:
Tests finish in as few as 3 minutes and results display in percent, parts per million, or micrograms moisture.

Accuracy Down to 10 ppm or Less:
Results correlate with traditional titration methods on samples up to 5 cc.

Simple & Easy to Operate:
Automatic, menu-driven prompts require minimal training, perfect for the production floor or lab.


  • Speed
  • Accuracy
  • Reliability
  • Consistency
  • Ease of Use
  • Free Loaner Service
  • Free On-site Trials
  • 24-Hour Customer Support
  • Free Application Development 

Additional Features:

  • Moisture specific sensor reduces volatile interferences
  • Easy product test development methods ensure optimum test results
  • Temperatures are programmable and maintained within ±1°C
  • Real-time graph of moisture curve and rate of moisture loss
  • Continuous display of test time, current temperature, programmed test temperature, current microgram water measurement, and calculated moisture content
  • Flexible ending criteria ensure accurate test results
  • Statistical features calculate mean, standard deviation and relative standard deviation
  • Self-diagnostics alert operator of any instrument problems
  • Security feature restricts access to program and instrument settings


  • Sample Size 1 to 5 cc
  • Resolution 0.1 ppm
  • Moisture Range 10 ppm or 10 μg water up to 10%
  • Results Display % Moisture, ppm Moisture, or μg Water
  • Ending Criteria Predict, Rate, Time and Time then Rate
  • Heating Range 25-200°C, set in 1°C increments and maintained to ±1°C
  • Test Parameter Memory 102 Programs
  • Program Identification Alphanumeric and/or symbols; programmable prompts for lot or product ID numbers
  • Test Result Memory Data from last 30 tests
  • Statistical Calculation Mean, Standard Deviation, and Relative Standard Deviation
  • Power Requirements 100-120 V~, 50/60 Hz, 1 amp (standby) or 8 amps (heat on)
  • or 220-240 V~, 50/60 Hz, 0.5 amps (standby) or 4 amps (heat on)
  • Interfaces RS-232 (9-pin standard) for balance or PC interface; Parallel Printer (LPT-PC 25-pin standard); 5 pin DIN connector for 101 key PC keyboard
  • Dimensions 5.75" H x 14" W x 14.5" D / 146 mm H x 457 mm W x 370 mm D
  • Weight 19 lbs / 8.6 kg
  • Warranty Two years, factory parts and labor (one year international)
Contact us

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

+34 943 82 00 82
Tech support
+34 943 82 07 90

Ask us about Moisture Analyzer Computrac Vapor Pro Fx