Scratch (spherical tip)
Spherical scratch tips measure surface resistance to marring and gouging. Available in 1.0mm and 7.0mm diameters. Fits Model 5750 spline shaft directly.
To measure the relative resistance or susceptibility of a material surface to marring, ouging and other similar physical damage, spherical scratch tips are suggested. Available in a 1.0mm or 7.0mm diameter hemisphere, these tips can be screwed directly into a tapped hole at the bottom of the spline shaft ( Model 5750 only).
Code | Model | Dimension | Weigth |
TA-134122 | Scratch spherical tip | 0,5mm diameter | 9,5 g. |
TA-132347 | Scratch spherical tip | 1,0mm diameter | 9,5 g. |
TA-132348 | Scratch spherical tip | 7,0mm diameter | 11,5 g. |
References
Reference | Description | Buy |
---|---|---|
TA-121006 | Conical Diamond Tool with 90°, 3 mil (.003”) radius point | Request quotation |
TA-121006-1 | Conical Diamond Tool with 90°, 3.5 mil (.0035”) radius point | Request quotation |
TA-121006-2 | Conical Diamond Tool with 90°, 3.5 mil (.0035”) ra | Request quotation |