PosiTest PC, non-contact uncured powder thickness gage

The Defelsko PosiTest PC measures powder coating thickness before polymerization quickly and accurately, contact-free, and is ready to use directly on the production line.

The Defelsko PosiTest PC is an affordable ultrasonic gauge designed to measure powder coating thickness before polymerization. It allows fast and precise inspection of uncured powder coatings, ideal for production lines and moving parts.

Advantages of the PosiTest PC

• Easy to Use
  • Ready to measure straight out of the box.
  • Measurement speed up to 4× faster than other devices.
  • No calibration adjustments required for most powders.
  • Intuitive digital display with icon-based menu.
• Accurate and Reliable
  • Enhanced sensor technology for small tubes, irregular shapes, and moving parts.
  • 1- and 2-point calibration with Cal Reset function.
  • Complies with ASTM D7378.
• Durable and Ergonomic
  • Resistant to solvents, acids, oils, water, and dust.
  • Lightweight, ergonomic design for easy transport.
  • Hard case and protective screen included.
  • Two-year warranty.
• Versatile
  • Contact-free measurement without disturbing applied powder.
  • High-contrast color display with adjustable brightness.
  • Stores up to 999 readings, downloadable via PosiSoft Desktop Software.
  • Continuous scan mode for large areas.
  • Mils/microns selectable; USB port for quick PC connection.

Technical Specifications

• Measurement range: 20–100 μm (0.8–4.0 mils).
• Resolution: 1 μm (0.1 mil).
• Accuracy: ±5 μm (±0.2 mil).
• Measurement time: 1–3 seconds.
• Measurement distance: 19 mm (0.75 inches).
• Measurement area: 2 mm (0.08 inches).
• Dimensions: 241 × 64 × 51 mm.
• Weight: 180 g (without batteries).

Includes Zero Fixture probe, 4 AAA batteries, screwdriver, spare screen, lens protector, USB cable, and hard case.

Applications

• Inspection of powder coatings before curing.
• Quality control in automotive, metallurgy, and plastics production lines.
• Measurement of dry film thickness before baking.
• Compatible with PosiTector 6000 and PosiTest DFT powder inspection kits.

Frequently Asked Questions (FAQ)

Can I measure cured powder with this device?
No, the PosiTest PC is designed to measure powder before polymerization.

Does it require frequent calibration?
Most powders require no adjustments; 1- or 2-point calibration options are available for unusual powders or substrates.

Can it be used on small or irregular parts?
Yes, thanks to the enhanced ultrasonic sensor and portable design, even tubes and complex shapes can be measured accurately.

How are the data exported?
All stored readings can be downloaded using PosiSoft Desktop Software via USB connection.