SWINTEK Persoz and König hardness pendulum
The SWINTEK hardness pendulum allows precise measurement of the surface hardness of paints and coatings using the Persoz and König systems, with a traceability certificate included.
The SWINTEK hardness pendulum is a professional device designed to accurately measure the surface hardness of coatings, paints and inks, also evaluating the proper curing of the material through a controlled oscillation test. It is ideal for quality control laboratories and industries that require reliable and traceable results.
How does the SWINTEK pendulum work?
The equipment operates using a pendulum that oscillates freely on two balls resting on the surface of the sample. The speed at which the oscillation decays indicates surface hardness:
- Hard surface → slower oscillation.
- Soft surface → faster oscillation.
The system allows the use of both the Persoz and König pendulums, with an integrated switch to select the type of pendulum according to the desired test.
Applications
The SWINTEK pendulum is mainly used for:
- Surface hardness testing of paints and inks.
- Quality control in coating laboratories.
- Evaluation of curing and resistance of treated surfaces.
It complies with international standards such as: UNE 48024-80, ISO 1522, DIN 531517, ASTM D 4366, ensuring reliable and standardized results.
SWINTEK Equipment and Accessories
The unit is supplied complete and ready for use:
- SWINTEK base unit.
- Persoz or König pendulum (as selected).
- Digital cycle counter with automatic stop and result retention.
- Remote trigger.
- Methacrylate protective cover to prevent air currents.
- Reference glass and bubble level.
- Instruction manual and special packaging.
Pendulum Characteristics
| System | Shape | Weight | Release angle | Oscillations on standard glass |
| Persoz | Quadrangular | 500 g | 12° | 435 ± 15 oscillations |
| König | Triangular | 200 g | 6° | 178 ± 8 oscillations |
Each system must be specified when placing the order to ensure equipment compatibility.
Ordering References
- 0300110 – Persoz hardness pendulum.
- 0300120 – König hardness pendulum.
Additional kits to complete the equipment:
- 0300111 – König pendulum piece.
- 0300121 – Persoz pendulum piece.
Calibration Certificates
All SWINTEK pendulums include the SER-CT008 certificate with traceability, ensuring measurement reliability and compliance with laboratory standards.
Key Benefits of the SWINTEK Hardness Pendulum
- Precise measurement of coating hardness and curing.
- Compatibility with both Persoz and König systems in one single unit.
- Digital counter for easy reading and result retention.
- Sample protection against air currents and triggering errors.
- Compliance with international standards for quality control.
Frequently Asked Questions (FAQ)
What is the difference between the Persoz and König pendulums?
The Persoz is quadrangular, weighs 500 g and is released at 12°, while the König is triangular, weighs 200 g and is released at 6°. Both measure hardness, but Persoz produces more oscillations on standard glass than König.
Can I use both systems with a single SWINTEK unit?
Yes, the unit allows quick switching between Persoz and König via the integrated electronic switch.
Which standards does the SWINTEK pendulum comply with?
It complies with UNE 48024-80, ISO 1522, DIN 531517 and ASTM D 4366, ensuring accurate and repeatable results.
Can hardness and curing be measured simultaneously?
Yes, the device determines surface hardness and verifies proper curing of the paint or ink in a single test.
References
| Reference | Description | Buy |
|---|---|---|
| 0300110 | Persoz Pendulum Hardness tester (Complete equipment) | Request quotation |
| 0300120 | König Pendulum (Complete equipment) | Request quotation |
