Digital concrete moisture encounter

Non-destructive instrument for measuring moisture levels in concrete and sand-cement floors.. Range 6%.

The CM 1700 concrete moisture meter by NEURTEK uses electrical impedance to provide reliable results by simply placing the device on the surface. It’s ideal for on-site inspections, flooring installations, or surface preparation before painting.

How does it work?

This non-destructive digital concrete moisture meter uses 8 electrodes to generate a low-frequency electric field. This system allows moisture measurement several centimeters below the surface, without drilling or damaging the concrete structure.

⚠️ Not suitable for measuring through conductive materials such as metal, rubber, or wet surfaces.

Where can you use it?

The CM 1700 is perfect for:

  • Large concrete surfaces.
  • Cement screeds and subfloors before installing wooden flooring.
  • Areas to be painted that require controlled moisture levels.

It's also useful for detecting leaks or moisture build-up, thanks to its quick scanning mode.

Measurement Scales

With 8 different scales, the CM 1700 adapts to a wide range of materials and needs:

  • Concrete: 0 - 6% H₂O
  • Cement screed: 0 - 6% H₂O
  • Cement screed (carbide method): 0 - 4% CM
  • Anhydrite screed: 0 - 3.5% H₂O
  • Anhydrite screed (carbide method): 0 - 1.9% CM
  • Caisson scale: 0.3 - 15.3 m
  • Relative scale: 0 - 100%
  • Gypsum: 0 - 10%

Key Features

  • Non-invasive and accurate measurement.
  • Easy one-hand operation.
  • Max Hold function for hard-to-reach areas.
  • Auto power-off for extended battery life.

Technical Specifications

  • Dimensions: 147 × 89 × 33 mm
  • Power supply: 2 × AA batteries
  • Battery life: up to 20 hours
  • Display: monochrome LCD (128×64 px) with backlight
  • Operating temperature: 5°C to 40°C
  • Accuracy: ±0.5%

How to Use It

  1. Place the CM 1700 on the surface.
  2. Ensure the spring-loaded electrodes are fully in contact.
  3. Apply even pressure to obtain a stable reading.
  4. Take multiple readings in nearby spots for more accurate results.

*As concrete dries, moisture levels may vary across the surface. Multiple measurements are recommended.

To turn off the device, press and hold the ON/HOLD button for 2 seconds.

Usage Recommendations

  • Do not press too hard to avoid damaging the electrodes.
  • Avoid touching the electrodes during measurement to prevent inaccurate readings.

References

Reference Description Buy
0809200 Concrete moisture meter CM 1700 4 scales: concrete 0-6%,carbide method 0-6%, relative scale 0-100% Request quotation