Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Dry Film coatings o Metalic bases

PosiTector DEFELSKO thickness gauges 6000 and LIST to dry films on metal substrates both ferrous and nonferrous. Memory models, statistics, alarm Max / Min (HiLo), USB and automatic temperature compensation.

Positector 6000 coating thickness gauges

Positector 6000 coating thickness gauges for all substrate Rugged, fully electronic coating thickness gaugr use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly. +

PosiTest DFT

The PosiTest DFT Coating Thickness Gage measures coatings on ALL metals. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments. +

Coating Thickness Meters TOP-CHECK of List

The TOP CHECK is hardly bigger than a measuring probe and have a worldwide unique measuring probe that can be swivelled by 90°. Range until 5mm, ferrous base. +

PosiTector 6000 Probes

The PosiTector 6000 consists of a body and a probe. A wide selection of interchangeable probes are available. All bodies accept all probes. Probes to suit the measurement to inaccessible areas or with different morphologies. +

PostiTest F/FM/G/GM

Rugged mechanical dial-type mil gage. Measures coating thickness on ferrous (steel) substrates. +

MEGA-CHECK Pocket, coating thickness on metal

The new MEGA-CHECK Pocket coating thickness meters use digital measuring probes, in which the analog signals are digitised directly in the probe and transferred digitally via the probe cable to the measuring device. This new technology is very immune to interference and makes high accuracy, reproducible measurements possible. +


Mechanical pen-type gage. Measures coating thickness on small, hot or hard-to-reach ferrous (steel) substrates. +

MEGA-CHECK Basic / Profi / Master

Coating Thickness Meters MEGA-CHECK for coating thickness on metals +

Certified Plastic Shims

The Calibration Foil Set contains 8 shims in the range of 25 to 1500 µm. Certificate of Calibration showing traceability to NIST is included +

PosiTector Inspection Kits

PosiTector Inspection Kits contain a PosiTector gage body (Standard or Advanced) and 3 probes – coating thickness, environmental and surface profile, as well as, accessories in a convenient hard shell carrying case. +