Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

NEURTEK: stays open with product supply and calibrations laboratory ISO-17025. More info

Wet Film Thickness Gauge WG

Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications.


• Accurate and made of stainless steel make this comb a long-lasting and reusable measuring instrument.
• Wide range of measurement. From 20 a 10.000 microns, which covers nearly al possibilities
• Place a comb perpendicular to and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet."
• Remove the comb from the film.
• The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value.


Models available for several different applications:

  • 20 to 370 microns in 24 steps (6x4) for decorative paints and primers.
  • 25 to 2000 microns in 36 steps (6x6)for protective coatings and high solids. With edge grinding check (2mm).
  • 50 to 10000 microns in 71 steps (8x9)for extremely thick films such as floor coatings, fillers, fire, proofing, plaster, adhesives etc.


Referencia Description Quotation Request
0220600 Wet film thickness Comb 20-370 µm Quotation Request
0220500 Wet film thickness Comb 25-2.000 µm Quotation Request
0220700 Wet film thickness COMB 50-10.000 µm Quotation Request
0220900 Wet film thickness Plastic Comb 25-900 µm 11-50: 7€/ud. *** 51-99: 5€/ud. *** 100 or more: 3€/ud. Quotation Request



UNE 4803-80, ISO 2808-7B, BS3900-C5 método 7B y ASTM D4414-A.

Maintenance service and calibration

Contact us