Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Thickness

Film thickness meters from DEFELSKO, LIST and COATMASTER for dry or wet coatings, on ferrous or non ferrous substrates and any other material. Non contact thickness measurement.

The coating thickness is one of the keys to ensuring the quality and durability of both the coating and the substrate.

There are a variety of equipment for measuring the thickness of dry coating, almost all digital probe integrated into the equipment to get a good size and ergonomy or with extensible probe to reach difficult places or for attaching special probes. The simplest and most common equipment is the FE model for iron and steel. To measure on other metals (aluminum, etc.). You can choose a specific equipment only non-magnetic metal (N) or a Combo or FN for measurements on magnetic and non-magnetic metals.

For the measurement of non-metallic coatings on substrates is necessary to use ultrasound equipment or systems such as PIG destructive. Another important technique is to measure the thickness on wet before it dries. The method is not accurate, but is indicative of the final result without having to wait for complete drying. There are several methods, from the usual comb to the rulin or Pfund.

Material Thickness

The thickness of material such as metals and plastics can be measured with ultrasonic technology. Suitable for measuring the effect of corrosion or erosion on tanks, pipes... +

Dry Film coatings o Metalic bases

PosiTector DEFELSKO thickness gauges 6000 and LIST to dry films on metal substrates both ferrous and nonferrous. Memory models, statistics, alarm Max / Min (HiLo), USB and automatic temperature compensation. +

Wet or Fresh coating gauge

Measures the thickness of fresh liquid or powder coating layers vefore curing, enabling rectification of unsatisfactory layers by adding mor material or blowing off the excess. The wet layer/cured layer ratio must be calculated in each case. This value is generally is 50%, but amay depend on many variables. +

On-Line Coating Thickness Meters

COATMASTER and POWDER SAVE, equipment for measuring film dry and wet paint and coatings without contact and online. +

Dry Film coatings on Non-Metalic bases

DeFelsko PosiTector 200 non-destructive and PIG destructive method. Coating thickness gauge for measurement of single or multiple layer coatings over wood, concrete, plastics, composites and more. +

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Thickness