Contact us
+34 943 82 00 82

Skip to content. | Skip to navigation

Equipment for Quality Control and R&D+i

Cross Hatch Adhesion Tester

Adhesion Tester appropriated to measure the adhesion of coatings or paints.

Adhesion Tester appropriated to measure the adhesion of coatings or paints.

A right-angled lattice pattern is cut into the coating through to the substrate. After applying a normalized adhesive tape the resistance to separation can be observed on the tape by using a loupe.

Simple but effective method for determining the adhesion of a large variety of coatings. The instrument is ideal for thin coatings on flat surfaces, available with different
spacings, corresponding to the thickness of layer to be tested.

References

Referencia Description Quotation Request
0302009 Cross Cut Adhesion tester, set of case with brush, eye glass, handle and adhesive tape Quotation Request
0302001 Round Blade 1 mm, 6 cuts (0-60 µm thickness) Quotation Request
0302002 Round Blade 2 mm, 6 cuts (60-120 µm thickness) Quotation Request
0302003 Round Blade 3 mm, 6 cuts (121-250 µm thickness) Quotation Request
0302004 Round Blade 4 mm, 5 cuts ( >250 µm thickness) Quotation Request
0302005 Round Blade 1 mm, 11 cuts (special application) Quotation Request
Contact us

Standards

UNE EN ISO 2409, ASTM D3359, DIN 53151.

Maintenance service and calibration

Contact us

Contact us

We are here to help you. Please call or write us an email.

Commercial
+34 943 82 00 82
Tech support
+34 943 82 07 90
Email

Ask us about Cross Hatch Adhesion Tester