Impact tester for paint
Impact test of paint coatings applied to metal base. ISO, DIN, ASTM.
The Impact Tester is used for measuring the resistance of coatings to impact. Thanks to it you can simulate the production of cracks and peeling, resistance to shocks, the flexibility, adherence and elongation of coatings.
If you have a standard to comply with, just place the mass at the indicated height and release it. Then, check visually for possible cracks.
To check the resistance of a coating, you can continue testing by gradually increasing the height until the mass produces cracks on the sample.
The Impact Tester comes with a support base, ruled tube and an impact mass equipped with a holding device according to the required standard - (for specific accessories, see table on the datasheet).
All the information avaiable on the datasheet.
Referencias
| Referencia | Descripción | Solicitar oferta |
|---|---|---|
| 0304020 | Impact tester for Coatings according to UNE-EN-ISO 6272-1 / DIN55669 | Solicite oferta |
| 0304030 | Impact tester for Coatings according to UNE EN ISO 6272-2 | Solicite oferta |
| 0304040 | Impact tester for Coatings according to ASTM D-2794 | Solicite oferta |
| 0305300 | Enamel impact Tester UNE EN 10209 (Anexo C) | Solicite oferta |
| 0304100 | Road Marking Impact Tester (MELC 13.05/B/C) UNE EN 12466-1 Punch ø 50 ± 0,5mm. and weight 510 ± 1 gr. | Solicite oferta |
| 0304025 | Stop ring collar and sample clamp for weight release | Solicite oferta |
| 0304110 | vertical signposting impact tester | Solicite oferta |
